All length converters
Pick the conversion you need. Each page has an instant calculator, the formula, a table of common values and answers to common questions.
Which length converter do you need?
This page lists every converter on Pulgadas a CM. They are grouped by the units people mix up most often: inches and centimeters, millimeters and inches, feet and centimeters, feet and meters, and feet-and-inches for body height. Each converter page has the same calculator, but the formula, the examples and the table are specific to that pair of units.
- Inches to CM 1 in = 2.54 cm
- CM to Inches 1 cm = 0.3937008 in
- MM to Inches 1 mm = 0.03937008 in
- Inches to MM 1 in = 25.4 mm
- Feet to CM 1 ft = 30.48 cm
- CM to Feet 1 cm = 0.0328084 ft
- Feet to Inches 1 ft = 12 in
- Inches to Feet 1 in = 0.08333333 ft
- Meters to Feet 1 m = 3.28084 ft
- Feet to Meters 1 ft = 0.3048 m
- MM to CM 1 mm = 0.1 cm
- CM to MM 1 cm = 10 mm
- Feet and Inches to CM 5′ 8″ = 172.72 cm
- CM to Feet and Inches 180 cm = 5′ 10.87″
Inches, centimeters and millimeters
Use inches ⇄ cm for screens, phones, tires, pipes, paper and anything described in inches. Switch to millimeters when you are matching a drill bit, a screw or a 3D-printed part, because a millimeter is a tenth of a centimeter and small sizes are easier to read that way. The inch chart covers fractions such as 3/8″ and 5/16″.
Feet, meters and height
Feet ⇄ meters is for rooms, ceilings, boats and altitude. For body height, use the feet-and-inches converters: they read 5′ 8″ directly and return 172.72 cm, which a plain feet converter would get wrong if you typed 5.8.
TV and screen sizes
Screen sizes are diagonals in inches. The TV pages turn them into centimeters and add the width and height of a 16:9 screen, so you can check a TV unit or a wall before you buy.
Other TV sizes
32 inches in cm · 43 inches in cm · 50 inches in cm · 55 inches in cm · 65 inches in cm
Which converter should you use?
Use inches ⇄ cm for screens, tires, pipes and anything sold in the US or UK, and millimeters when a drawing or a bolt is specified to the tenth of a millimeter. Feet ⇄ meters suits room sizes, altitude and distances, while the feet-and-inches converters are made for body height written as 5′8″.
Rounding matters more than most people expect. For clothing and furniture, one decimal is plenty; for machining or 3D printing, keep at least two decimals in millimeters. All results here use exact factors, so any rounding you see is only in the display.
Two mistakes cause most wrong answers: reading decimal feet (5.8 ft) as feet and inches (5 ft 8 in), and applying the factor in the wrong direction. If the result looks too large or small, check the direction first: going from inches to centimeters always makes the number bigger.